TORQUE MEASUREMENT

a) T-BOX 2

MEASUREMENT DEVICE

The T-Box™ 2 utilizes its powerful processor to provide a seamless and complete torque data collection package with tool calibrations, data logging, simultaneous transducer connections and archiving to your PC. Two task windows allow simultaneous working – measure against a target while graphing the cycle, take readings from two transducers simultaneously, capture two different graphs at the same time or manage and review readings as they are captured. T-Box 2 is available in 12 different languages and includes total of 6 modes for torque tool measurement.

  • Accuracy of ±0.05% of reading
  • Includes six measurement modes for torque tools: Track, Click, Dial & Electronic, Stall, Screwdriver, and Hydraulic
  • Exports readings and graphs to CSV and JSON formats for third-party software integration
  • Large-capacity memory with 120 GB SSD storage
  • Fast CPU with up to 2.3 GHz frequency and 4 GB RAM for smooth operation
  • Two USB ports, RS-232 serial port, and two independently configurable ancillary ports
  • Rear panel features 100 mm × 100 mm VESA mounting holes
  • Features a 10.1″ multi-touch screen display with on-screen graphic icons
  • Supplied with an accredited calibration certificate
T-BOX 2
Model Item Weight (kg) A (mm) B (mm) C (mm) D (mm) E (mm)
T-Box 2 43542 5,2 225 200 254 300 100

b) TRUCHECK 2

TORQUE TESTER

TruCheck 2 is a cost effective torque wrench checker that has been redesigned to incorporate improved features whilst maintaining ease of use. he TruCheck 2 aims to cut the cost of purchasing a torque wrench checking system and remove the reservations over the complexity of using such equipment. TruCheck 2 Plus allows a selection of torque units, three modes of operation (Click, Dial and Track), the ability to store up to 15 targets and select from 12 languages.

  • ±1% of reading accuracy
  • Resolution of 0.1 Nm
  • Ability to set 15 preset values
  • Compatible with both automatic and manual reset operation
  • Torque units: Nm, lbf.ft, and lbf.in
  • Inbuilt Micro USB 2.0 port enables power from any USB power source
  • Supplied with an accredited calibration certificate

TRUCHECK-2
Model Item (Basic) Item (Plus) Torque Range (Nm) Resolution Drive Adapter
TruCheck2 3 43514 43515 0,1 – 3 0,001 1/4″ M hex 1/4″ F SQ
TruCheck2 10 43516 43517 0,5 – 10 0,01 1/4″ M hex 1/4″ F SQ
TruCheck2 30 43518 43563 1,5 – 30 0,01 10 mm M hex 1/4″ or 3/8″ F SQ
TruCheck2 65 43520 43521 3 – 65 0,01 3/8″ F SQ –
TruCheck2 350 43524 43525 10 – 350 0,1 1/2″ F SQ –
TruCheck2 1100 43530 43531 50 – 1 100 1 27 mm M hex –
TruCheck2 2100 43532 43533 200 – 2 100 1 27 mm M hex 1″ F SQ

c) PRO-TEST

TORQUE TESTER

Combining the simplicity of the TTT and TST, the Pro-Test Series is offered as the most comprehensive torque wrench tester on the market today. The Pro-Test has many features designed to make life easier and reduce the opportunities for error when calibrating torque wrenches. Flexible mounting options allow mounting the Pro-Test anywhere you want – even a little off the display device itself.

  • Guaranteed accuracy better than ±1% across the full calibration range; for 0–100% of full scale, accuracy is better than ±0.5%
  • Short-cut keys for quick wrench type selection
  • Memory function displays the last five readings taken by the operator
  • Peak Memory mode records the highest value when testing click-type torque wrenches
  • Large backlit display for clear visibility from a distance and in poor lighting conditions
  • User-selectable language with 11 available options
  • Supplied in a robust carry case with an accredited calibration certificate
  • RS-232 cable included for output of readings

EVOTORQUE 2
Model Item Drive Torque Range (Nm) R1 R2 min. R2 max. Free Speed (rpm) Weight (kg) Reaction Arm (kg)
ET2-68-2000 181471 1″ 400 – 2 000 75 120 165 – – –
ET2-72-1000 180220.B06 3/4″ 200 – 1 000 71 124 167 21 10,4 1,5
ET2-72-1350 180221.B06 3/4” 270 – 1 350 71 124 167 17 10,4 1,5
ET2-72-2000 180222.B08 1″ 400 – 2 000 76 124 167 11 10,8 1,5
ET2-80-2700 180229.B08 1″ 540 – 2 700 76 124 167 10 10,8 1,5
ET2-92-4000 180228.B08 1” 800 – 4 000 70 125 175 6 12,9 2,6
ET2-119-7000 180226.B12 1 1/2” 1 400 – 7 000 90 162 210 3,3 16,8 3

d) TST

TORQUE TESTER

The TST combines simplicity with up to date technology to provide a high quality instrument for testing and calibrating low capacity torque tools. Featuring an internal transducer complete with Rundown Fixture, the TST is available in 3 torque ranges and its primary range is +/-0.5% of reading from 20% to 100% of full scale. What makes the TST genuinely versatile is the interface for an external transducer – accessed by a 2 way switch in the TST, this interface allows the connection of any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from Norbar or other manufacturers.

  • ‘SMART’ intelligence for automatic transducer recognition
  • Pictorial display panel for easy mode selection
  • Limit detection with low, pass, and fail indication; up to eight target values can be set
  • Digital limit state output for control of external tools
  • Operates from a fast-charge internal battery pack (up to 3 hours 20 minutes for a full charge) or AC supply (90–264 V)
  • Pulse count feature in Impulse mode and Clutch Tool mode
  • User-selectable frequency response for each operating mode
  • RS-232-C serial data interface for connection to a printer or PC
  • Supplied in a robust carry case

TST
Model Item Calibrated Torque Range (Nm) Resolution
TST 2 43212 0,04 – 2 0,0001
TST 10 43213 0,50 – 10 0,001
TST 25 43214 1,25 – 25 0,001

e) TTT

MEASUREMENT DEVICE

The TTT measurement device offers 3 transducer inputs, rather than 2. This will be particularly ideal for customers using the TTT with the TWL1500 loader and full compliment of three FMT Transducers. Any transducer from Norbar’s ‘SMART’ range and most mV/V calibrated transducers from Norbar or other manufacturers can be connected to the TTT. All common measurement units for torque are included, in addition to which users can configure their own units to interface with non torque transducers.

  • ‘SMART’ intelligence for automatic transducer recognition
  • Up to 12 target values can be set
  • Limit detection with low, pass, and fail indication
  • 5-digit resolution for all Norbar transducers
  • All common torque measurement units included
  • RS-232-C serial data interface for connection to a printer or PC
  • Supplied in a robust carry case

EVOTORQUE 2
Model Item Height (mm) Width (mm) Depth (mm) Weight (kg)
TTT 43228 150 200 100 1

f) TWC

TORQUE WRENCH LOADER

The Torque Wrench Calibrator is designed to perform accurate calibrations of Click, Cam, Dial and Electronic torque wrench designs in accordance to ISO 6789:2017. Flexible tool template system minimizes number of templates required to cover a wide range of tools aiding its efficient use. TWC torque wrench loaders are available as both manual and automatic models.

  • Two-speed gearbox designed to provide an optimal balance of speed and control
  • Rotating transducer design ensures the load is applied at 90° to the torque wrench handle
  • Environmental monitoring of humidity and temperature to ensure compliance with calibration standards
  • Lightweight alloy construction allows for easy transport of the TWC
  • Wide torque range from 1 to 1,500 Nm
  • Easy-to-use operation

MANUAL MODELS
Item Torque Range (Nm) Min. Length (mm) Max. Length (mm) A (mm) B (mm) C (mm) D (mm) E (mm) Weight (kg)
60331 1 – 400 135 750 620 330 395 487 1 010 35
60332 1 – 1 500 135 1 500 620 330 395 487 1 760 40
AUTOMATIC MODELS
Item Torque Range (Nm) Min. Length (mm) Max. Length (mm) A (mm) B (mm) C (mm) D (mm) E (mm) Weight (kg)
60312 1 – 400 135 750 620 330 395 – 1 019 40
60313 1 – 1 500 135 1 500 620 330 395 – 1 769 45

g) FLANGE MOUNTED TRANSDUCERS

Flange Mounted Transducers incorporate mounting points for securely fixing the transducer to the working surface. Attaching points allow mounting the transducers on a flat surface or a torque wrench loader. The transducer lead is also included and is fitted with a high quality Lemo® connector.

  • Transducer equipped with a sensor cable
  • Typically better than Class 1 for the primary classification range, with ±0.5% of reading from 20% to 100% of full scale
  • ‘SMART’ transducers feature built-in memory containing essential transducer information, allowing Norbar instruments to recognize and be ready for immediate use
  • Rundown fixture included on transducers up to 150 Nm, enabling joint simulation for power tool testing
  • Supplied with a calibration certificate

FLANGE MOUNTED TRANSDUCERS
Capacity (Nm) Item Torque Range (Nm) Drive Rundown Drive Drive Resolution
2 50671.xxx 0,04 – 2 1/4” 50539 1⁄4″ hex 0,0001
10 50672.xxx 0,5 – 10 1/4” 50540 1⁄4″ hex 0,001
25 50673.xxx 1,25 – 25 1/4”, 3/8” 50541 1/4″ hex 0,001
60 50844.xxx 3 – 60 3/8″, 1/2″ 50845 22 mm 8-sakara 0,01
150 50674.xxx 7,5 – 150 3/8”, 1/2” 50692 22 mm 8-sakara 0,01
400 50675.xxx 20 – 400 1/2”, 3/4” 50819 22 mm 8-sakara 0,01
1500 50676.xxx 30 – 1 500 1/2”, 3/4”, 1” – 22 mm 8-sakara 0,01

h) ROTARY TRANSDUCERS

Rotary transducers are designed to measure the torque from continuously rotating shafts such as impulse tools and certain non-impulse tools with a severe clutch action. They will also work with instruments that cannot read the memory information, by inputting the relevant calibration details manually.

  • Typically better than Class 1 for the primary classification range, with ±0.5% of reading from 20% to 100% of full scale
  • ‘SMART’ transducers include a built-in memory circuit with essential transducer information, allowing Norbar instruments to recognize them instantly and be ready for use
  • Supplied with a calibration certificate
  • Manufactured specifically for torque-controlled power tools, including impulse wrenches
  • Angle measurement also available

ROTARY TRANSDUVERS
Item Capacity (Nm) Drive Max. RPM – Continuous Max. RPM – Intermittent A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)
50708.xxx 5 1/4” M/F hex 5 000 11 000 30 58 116 – 49 26
50709.xxx 20 1/4” M/F hex 5 000 11 000 30 58 116 – 49 26
50710.xxx 20 1/4” M/F 5 000 11 000 30 58 72 10 33 7
50711.xxx 75 3/8” M/F 5 000 11 000 30 62 77 13 36 11
50712.xxx 200 1/2” M/F 2 500 7 600 42 67 87 16 42 15
50713.xxx 250 3/4” M/F 2 000 5 000 52 73 106 24 51 21
50714.xxx 500 3/4” M/F 2 000 5 000 52 73 106 24 51 21
50715.xxx 1500 1” M/F 1 000 4 400 63 79 125 29 61 26

i) STATIC TRANSDUCERS

The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of many calibration laboratories throughout the world. The versatile use of transducers is supported by Norbar’s significantly wide range of wrench loaders and rundowns.

  • Up to 7,000 Nm: Class 1 or better for the primary classification range, with ±0.5% of reading from 20% to 100% of full scale
  • From 7,000 Nm up to 100,000 Nm: Class 1 to Class 5 for the classification range, with accuracy from ±0.5% to ±2.5% of reading depending on the transducer type
  • Calibration available up to 100,000 Nm with an accredited calibration certificate
  • ‘SMART’ transducers feature built-in memory containing essential information, allowing Norbar instruments to recognize them instantly and be ready for use
  • Calibrated in the clockwise direction as standard; anti-clockwise calibration available on request

STATIC TRANSDUCERS
Item Torque Range (Nm) Drive Ø (mm) Length (mm) Bench No.
50587.xxx 0,1 – 1 1/4″ M/F 36 86 50211
50588.xxx 0,25 – 2,5 1/4″ M/F 36 86 50211
50589.xxx 0,5 – 5 1/4″ M/F 36 86 50211
50590.xxx 1 – 10 1/4″ M/F 36 86 50211
50591.xxx 2,5 – 25 3/8″ M/F 36 90 50212
50592.xxx 5 – 50 3/8″ M/F 36 90 50212
50593.xxx 10 – 100 1/2″ M/F 36 93 50213
50594.xxx 25 – 250 1/2″ M/F 36 93 50213
50701.xxx 25 – 250 3/4″ M/F 54 142 50220
50849.xxx 35 – 350 1/2″ M/F 36 93 50213
50596.xxx 50 – 500 3/4″ M/F 54 142 50220
50772.xxx 100 – 1 000 1″ M/F 54 147 50221
50766.xxx 150 – 1 500 1″ M/F 54 147 50221
50703.xxx 250 – 2 500 1 1/2″ M/F 95 160 50127
50791.xxx 300 – 3 000 1 1/2″ M/F 95 160 50127
50849.xxx 350 – 3 500 1 1/2″ M/F 95 160 50127
50599.xxx 500 – 5 000 1 1/2″ M/F 95 160 50127
50669.xxx 700 – 7 000 1 1/2″ M/F 95 160 50127
50776.xxx 1 000 – 10 000 2 1/2″ M/F 130 209 –
50603.xxx 2 500 – 25 000 2 1/2″ M/M 130 209 –
50797.xxx 2 500 – 25 000 2 1/2″ M/F 130 209 –
50794.xxx 5 000 – 50 000 3 1/2″ M/M 165 271 –
50781.xxx 5 000 – 50 000 2 1/2″ M/F 130 209 –
50783.xxx 8 000 – 80 000 3 1/2″ M/F 160 292 –
50796.xxx 10 000 – 100 000 3 1/2″ M/M 165 271 –
50816.xxx 10 000 – 100 000 3 1/2″ M/F 160 292 –